Clear-Com TEMPEST 2400 Specifiche Scaricare il pdf (Pagina 12)

Clear-Com Communication Systems Page 12 of 100

Tempest 2400 Wireless Intercom System

Maintenance and Care

Cleaning

Generally, the Tempest Wireless hardware should be cleaned only with a damp cloth. A soft cloth with

rubbing alcohol may be used to wipe the units, if more than water is needed. Never spray solvents or

chemicals onto the units.

Because of Tempest’s weather resistant design it is not highly susceptible to dust or airborne

contaminants. However, all electronic devices can be susceptible to particulate contamination. If exposed

to an extremely dusty environment, contact an authorized Tempest service center for internal cleaning.

Temperature and Humidity

Ideally, all electronics should be stored and used in a controlled environment with moderate temperature

and humidity. Tempest components are designed to be very durable, and can tolerate a wide range of

environmental conditions.

Install the base station in a location where it will not be exposed to extreme weather conditions. Protect

the unit against dust or moisture. Always protect any AC power connections from the elements with safety

in mind.

For more extreme environmental conditions, the base station can remain in a secure location with

antennas for the base station located remotely and connected by low-loss 50 Ohm coax cable, or the

optional Remote Transceiver can be used.

The Tempest Remote Transceiver is weather resistant, with gaskets intended to prevent moisture entry

from the top and sides. The CAT-5 cable connection on the bottom is not water tight. If it is to be used in

an environment subject to blowing rain, snow, fog or high humidity, protect the transceiver with a cover

that will not interfere with the RF.

The beltstations are designed to work wherever people work. While the beltstation design is weather

resistant, the headset XLR connector on the bottom is not watertight. beltstations should not be

submerged in liquids. Protect the battery compartment from water when changing batteries. The battery

compartment offers a route to the electronic circuitry.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 99 100

Nessun commento

Clear-Com TEMPEST 2400 Specifiche Pagina 12